Electronic Monitoring System-EMS467
Electronic Monitoring System-EMS467


  • Internet Ready
  • Field adjustable parameters
  • First-Out shutdowns and/or alarms
  • Shutdown history file
  • Service reminders
  • Four communication ports
  • Back lit alphanumeric display
  • Flash programmable
  • Approved for Class 1, Division 2 Groups A, B, C, D hazardous locations



The EMS467 Electronic Monitoring System / Controller is microprocessor based for monitoring and control of equipment functions. It is especially suited to tasks requiring remote modem or SCADA communications. The four built-in communication ports provide a variety of communications capabilities.


Basic programs provide selectable auto or manual start/stop and first-out shutdown for engine functions such as a pressure, temperature, level and overspeed. Time delays for lock out during start up are included. The EMS467 can be applied as an RTU to interface between SCADA applications and other control platforms.


With an inexpensive wireless data modem attached, the EMS467 can be used for remote monitoring and control through the internet. The unit can send emails, serve web pages, and transmit data to remote servers.


An external PC card reader can be used with the EMS467 to log data from flow meters, pressure transmitters, electric gauge senders, and other sensing devices. This is a popular application in the flood control market.


Operating data is displayed on a 32 character back lit alphanumeric liquid crystal display. An on-board realtime clock keeps a log of equipment running hours and alerts you when to change oil, filters and perform other routine service.


The EMS467 operating parameters are configured through a simple three-button interface. Access to the system memory is controlled by entry codes.


A password-protected program uses a built-in memory to display the alarm/shutdown history, including a display of the last ten shutdowns, when and why they occurred, and displays all of the engine operating conditions at the time of the last shutdown.



The EMS467 has one RS485, one RS232, and two J1939 CAN communication ports. By using these ports and the necessary software, you can monitor and control your equipment from a remote location.

With the CAN ports, you can communicate to an electronic engine and display engine operation information on the display. 

Download PDF

Please fill the form to download the PDF